AERIGON IAH 3 Helicopter

Technical Specifications - AERIGON IAH 3 Helicopter

Description

The AERIGON IAH 3 Helicopter is the world’s first serially manufactured, six-armed unmanned aerial vehicle designed for professional cinema and broadcast production use. With its lift capacity of up to 23kg/50lbs it can carry the industry’s favorite equipment, and thanks to modular design it goes from packed in the box to ready-to-fly in 15 minutes. Completed with the AERIGON IAG 3 Gimbal it forms the AERIGON system — the only premium off-the-shelf cinema drone on the market.

Features

Light Weight

11kg/24lbs (with batteries) pre-preg molded carbon fibre structure.

Detachable Arms

Arms are quickly attached or detached. While airborne the arms are safely locked in place.

Shielded Electronics

All cabling and electronics mounted inside of the carbon fibre exoskeleton.

Thermal Cooling

Custom cooling system keeps the electronic speed controllers (ESCs) cool even in warm weather.

Temperature Monitoring

Motor temperatures continuously monitored via telemetry.

Optimized Propulsion

12 counter-rotating brushless motors provide heavy lift capacity on a small footprint.

Power Requirements

Power

3x Lithium-Ion Polymer 22.2 V (nominal) 16000 mAh rechargeable batteries.

Battery Life

Approximately 9-15 minutes, depending on payload.

Battery Charge Time

Approximately 1 hour.

Control

Flight Controller

DJI A2.

Pilot Communications

Transmitting end is a Futaba T14SG (2.4 GHz). Receiving end is a Futaba R7008SB 2.

Physical Specifications

Airframe

The overall airframe diameter is 1510mm/59.5″.

Weight

5.5kg/11lbs unloaded. 11kg/24lbs with batteries.

Payload

Minimum payload is 6kg/13lbs, with a maximum of 13.4kg/28.6lbs. Maximum take-off weight is 23kg/50lbs.

AERIGON IAH3

Performance

Speed

Maximum of 14m/s.

Vertical Speed

Up to 6m/s.

Operational Ceiling

Approximately 2000m/6500ft.

Maximum Roll/Pitch Angle

35°.

Hovering Accuracy

0.5m/20″ vertical and 2m/79″ horizontal, based on GPS.

Endurance Arms Take-Off Weight: Normal Air Pressure (1013hPa)

Takeoff weight at air pressure 1013hPa (normal)

Endurance Arms Take-Off Weight: Low Air Pressure (980hPa)

Takeoff weight at air pressure 1013hPa (low pressure)

Performance Arms Take-Off Weight: Normal Air Pressure (1013hPa)

Takeoff weight at air pressure 1013hPa (normal) with Performance Arms

Performance Arms Take-Off Weight: Low Air Pressure (980hPa)

Takeoff weight at air pressure 980hPa (low pressure) with Performance Arms

Environmental Specifications

Wind

Maximum wind speed is 8m/s.

Precipitation

No precipitation.

Internal Temperature Range

–5°C/23°F to 40°C/104°F.

AERIGON IAG 3 Gimbal

Technical Specifications - AERIGON IAG 3 Gimbal

Description

The AERIGON IAG 3 Gimbal features a proprietary advanced stabilization system powered by four powerful brushless motors, developed in-house at Intuitive Aerial. With a payload of up to 9kg/20lbs it keeps high-end camera configurations steady. Integrated video and power connections enable external equipment power and remote downlink video monitoring. Together with the AERIGON IAH 3 Helicopter it forms the AERIGON system — the only premium off-the-shelf cinema drone on the market.

Features

Light Weight

4.2kg/9.3lbs pre-preg molded carbon fibre structure.

Heavy Payload Capacity

Keep up to 9kg/20lbs of professional equipment steady.

Advanced Stabilization

Four powerful brushless motors stabilize equipment with a proprietary control system developed in-house at Intuitive Aerial.

Integrated Connections

Integrated power connectors for camera and downlink.

HD-SDI Passthrough

Connect your HD-video downlink without external cables.

Detachable Legs

The gimbal can be used with or without legs, for use with cranes and cable cam systems. Legs are attached with a quick locking mechanism for fast assembly and disassembly.

Cameras

Sony F55

RED Dragon

Grass Valley LDX

More ...

Work with any camera configuration that weighs up to 9kg/20lbs and can physically fit on the gimbal.

Physical Specifications

Dimensions

Width 620mm/24.4″, height 610mm/24.0″, length 614mm/24.2″.

Weight

4.2kg/9.3lbs unloaded. 4.7kg/10.4lbs with battery.

Payload

Minimum payload is 2kg/4.4lbs, with a maximum of 9kg/20lbs. Recommended focal length is 24-50mm. The maximum camera package length behind center of gravity is 220mm/8.6″.

AERIGON IAG3

Power Requirements

Power

1x Lithium-Ion Polymer 14-16V 4500mAh, 4-cell rechargeable battery.

Battery Life

Approximately 15-45 minutes, depending on power consumption of attached equipment.

Battery Charge Time

Approximately 1 hour.

Connections

HD-SDI Passthrough

1x HD-SDI connector on gimbal body for passthrough to external HD video link.

HDMI-Composite Converter

1x HDMI connector on gimbal body converts HDMI signal to CVBS for use with external SD video link.

Power Output

14-16V through 4-pin LEMO power out connections. 1x on gimbal head, and 2x on gimbal body. Maximum total load 10A.

Stabilization

Stabilization System

Intuitive Aerial proprietary stabilization and control system using high performance MEMS sensors.

Motors

Four brushless motors. 2x direct-drive for tilt, 1x direct-drive for roll, 1x belted drive for pan.

Control

Signal Transmission

2.4Ghz Futaba FASST control signal transmission.

Signal Range

Approximately 0.6km/0.4mi line-of-sight range. Varies with environment, terrain, surroundings.

Internal Communication

CAN-BUS based internal communication.

Software

Windows

Desktop application for parameter settings adjustments.

Mac OSX

Desktop application for parameter settings adjustments.

Accessories

Mitchell Mount Adaptor

Use the AERIGON gimbal with cranes, dollys, and other equipment using the Mitchell mount.

DOMINION controller

Technical Specifications - DOMINION controller

Description

The DOMINION by Intuitive Aerial is a sophisticated toolset for wireless, high-precision control of the remotely operated AERIGON platform, camera and lens, as well as the NEWTON remote camera head. The DOMINION is the most sophisticated and feature-rich gimbal and camera controller on the market.

PHYSICAL SPECIFICATIONS

Dimensions

396 x 209 x 115 mm

Weight

2.2 kg / 2.4 Lbs

Material

Machined Aluminum

Mounting

Integrated 100mm NATO accessory rail.
Tripod mount.
Neck strap and harness attachment rail.

Display

5” TFT-LCD Color (800×480)

Connectors

2x IA-CAN connectors
2x Power out (LEMO 1B.304)
1x Power in (LEMO 1B.304)
1x SD-card
1x USB
1x Ethernet

ENVIRONMENTAL

Protection

Dust and water protected.

Temperature Range

-20°C to +50°C (-4°F to 122°F)

POWER

Input supply

12-24V DC

Battery

Integrated 14.4V Li Ion

Power Consumption

5W

Power Output

External supply voltage
(12-24V) or;
battery voltage
(14.4V nom), Max 2.5A.

MISC

Cameras

RED EPIC X / Dragon
CANON C300 / C500*
SONY FS700 / F5 / F55*
PHANTOM FLEX4K
ARRI ALEXA Mini (start/stop)

Lens Control

RED W.M.D
RTMOTION MK3.1

Gimbal Telemetry

Battery voltage level.
3-axis vibration sensing.
3-axis motor torque sensing.
3-axis camera orientation.
Firmware version and settings.

System Interface

Ethernet
CAN Bus (IA-CAN)

Software Upgrade

Via USB
(Mac OS X, Windows, Linux)

*Available with software upgrade.

NEWTON Stabilized Head

Technical Specifications - NEWTON Stabilized Head

Description

The NEWTON by Intuitive Aerial is a versatile, light weight, gyro-stabilized, remote camera head made for professional broadcasters, cinema production companies and rental houses to stabilize cameras and perform steady shots whilst in motion on a variety of devices.

PHYSICAL SPECIFICATIONS

Dimensions

Max camera size: 210 x 260 x 210 mm (HxWxD).
Packing size: 390 x 170 x 350 mm (HxWxD).

Weight

6.8kg / 15lbs.

Material

Machined Aluminum.

Mounting

Mitchell mount or cheeseplate mounted over-slung, under-slung or cantilevered.

Max rotation speed

180deg/sec.

Display

2.4” TFT-LCD Color (320 x 240).

Rotation Specification

Pan rotation: unlimited.
Tilt: +45/-135 degrees.
Roll: -45/+45 degrees.

ENVIRONMENTAL

Protection

Dust and water protected.

Temperature Range

-20°C to +45°C (-4°F to 113°F).

POWER

Input Supply

14–25V DC

Battery

2x Sony BP-U90 (14.4V, 7800mAh) batteries.

Power Consumption

Standby: 0.1A
Average: 1.5A
Max: 10A

Power Output

External supply voltage
(14–25V) or;
battery voltage
(14.4V nom), Max 10A.

INTEGRATION

Cameras

RED EPIC X / Dragon
CANON C300 / C500*
SONY FS700 / F5 / F55*
PHANTOM FLEX4K
ARRI ALEXA Mini (start/stop)

Operator Controller Tally

SONY HDC-P1
GRASS-VALLEY LDX C80

Lens Control

FUJINON digital-drive
CANON HJ14ex4.3 and similar
RED W.M.D
RTMOTION MK3.1

Mounting Point Connectors

2x SDI out
1x Power out
1x Power in
1x Ethernet Control
1x Ethernet Camera Pass-Through
CAN BUS (IA-CAN)

System Interface

Ethernet
CAN Bus (IA-CAN)
RS232/422

Camera Connectors

2x SDI in
1x Ethernet Pass-Through
1x Power out (camera)
CAN BUS (IA-CAN)

DOMINION CONTROLLER

Dimensions

396 x 209 x 115 mm

Mounting

Integrated 100mm NATO
accessory rail.
Tripod mount.
Neck strap and harness
attachment rail.

Weight

2.2kg / 4.8 Lbs

Display

5” TFT-LCD Color (800×480)

Material

Machined Aluminum.

Connectors

2x IA-CAN connectors
2x Power out
1x Power in
1x SD-card
1x USB
1x Ethernet